Login:   Password:
Not Register?    Sign Up NOW!
Date: 02 August 2014
PREMIUM PLUS® Interior Flat Enamel  
Search Country   Reset filter
PREMIUM PLUS® Interior Flat Enamel

Sponsored Link:

PREMIUM PLUS® Interior Flat Enamel

Sponsored Link:

Product Description

This low-lustre, matte sheen provides a washable, easy to clean, mildew resistant finish. This 100% Acrylic Latex product offers improved hiding for greater coverage, the ultimate in durability and is backed by a lifetime guarantee*. 


Pre-mixed Colors Available in Select Markets 
- Ultra Pure White No. 1850 - MSDS 
- White No. 1852 - MSDS 

Tintable Bases 
- Deep Base No. 1853 - MSDS 
- Pastel Base No. 1855 - MSDS 
- Accent Base No. 1856 - MSDS 

Where To Use 
Previously painted or primed Interior surfaces. Ideal for Family Rooms, Living Rooms, Dining Rooms, Bedrooms, Kids' Rooms, Hallways, Kitchens, Bathrooms, Doors, Windows, Trim and Ceilings.

Preparation ** 
Remove loose paint, wash off any dirt and grease with detergent, eliminate mildew stains with BEHR® No. 62 Multi-Surface Deck-Prep Cleaner & Mildew Stain Remover.
Scuff sand glossy surfaces. 
Countersink nailheads, repair imperfections and sand smooth.
Remove all dust with a damp cloth, allow to dry.
Allow new stucco, plaster and masonry to cure for 30 days before priming.
Prime 
Use BEHR No. 75 Enamel Undercoater Primer & Sealer. On new drywall in low-moisture rooms, use BEHR No. 73 P.V.A Drywall Primer & Sealer.

Application 
Use product when the surface and air temperatures are between 50°-90°F (10°-32°C).
Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity. 
Use a high quality 3/8"-1/2" nap roller cover, nylon/polyester brush or an airless sprayer (.015 spray tip).
Coverage is 250 to 400 sq. ft. (23-37m²) per gallon depending on the surface texture, porosity and application method.
Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
Certain colors may require more than one coat for complete hide.
Dry Time 
Dries to touch in two hours at 77°F (25°C) and 50% humidity, re-coat in four hours. Longer dry time required in cooler temperatures and in higher humidity. 
After two weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
Dry paint film is mildew resistant.

Clean Up 
Use soap and water.
Properly dispose of all soiled rags and protect unused product from freezing.
To recycle or properly dispose of paint in your community call 1-800-CLEANUP or visit www.Earth911.org.
*LIMITED LIFETIME GUARANTEE 
BEHR PROCESS CORPORATION GUARANTEES THAT THIS PAINT MEETS THE FOLLOWING STANDARDS WHEN APPLIED AND CARED FOR ACCORDING TO LABEL DIRECTIONS. THIS GUARANTEE SHALL BE EFFECTIVE FOR SO LONG AS YOU RESIDE IN YOUR HOME AND IS MADE TO THE ORIGINAL RESIDENTIAL CONSUMER PAINT PURCHASER. THIS GUARANTEE IS NOT TRANSFERABLE. 

Ultimate Durability - The dried paint film resists peeling, blistering, fading and mildew growth, providing a scrubbable and washable finish from which you can easily remove stains and dirt. 

Outstanding Hide and Coverage - Assured when applied according to label directions. 

Complete Color Selection - Specifically formulated to achieve a full range of pure, clean colors available through computerized color matching. If this paint fails to perform as specified above, Behr Process Corporation will, at its option and upon proof-of-purchase, either furnish an equivalent amount of new paint to you, or refund the purchase price of this product. This guarantee excludes (1) labor and costs of labor for the application of any paint and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This guarantee gives you specific legal rights and you may also have other rights, which vary from state to state. 

** WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that may contain lead. Exposure to lead dust or fumes may cause serious health injury, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For additional information, contact the USEPA/Lead Information Hotline at 1-800-424-LEAD (U.S.A. only) or at www.epa.gov/lead. 
Note: Since 1978, by federal law, all consumer paint has been formulated without lead or lead-compounds. 

WARNING! This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. 
WARNING! IRRITANT! HARMFUL IF SWALLOWED. CONTAINS ETHYLENE GLYCOL. MAY CAUSE EYE, NOSE AND THROAT IRRITATION. AVOID CONTACT WITH SKIN AND EYES AND AVOID BREATHING OF VAPORS AND SPRAY MIST. WEAR EYE PROTECTION AND PROTECTIVE CLOTHING. USE ONLY WITH ADEQUATE VENTILATION. To avoid breathing vapors and spray mist, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness, increase fresh air. If properly used, a respirator (NIOSH approved for organic vapor with P series particulate pre-filter) may offer additional protection; obtain professional advice before using. A dust mask does not provide protection against vapors. Avoid contact with eyes and skin. Wash thoroughly after handling. Close container after each use. FIRST AID: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention; for skin, wash thoroughly with soap and water. If swallowed, get medical attention immediately. 
CAUTION: KEEP OUT OF REACH OF CHILDREN-DO NOT TAKE INTERNALLY.

Company Details

Being a leader in our industry requires one resource above all others - great people. To successfully respond to the changing needs of our customers and strategies of our competitors, BEHR has identified, developed, and retained quality people who... more

More Products of this Company: 1-Part Epoxy Acrylic Concrete & Garage Floor Paint, BEHR PREMIUM PLUS WITH STYLE® Bellagio Faux™ No. 725, BEHR PREMIUM PLUS WITH STYLE® Crackle No. 755, BEHR PREMIUM PLUS WITH STYLE® Crystal Clear Water Based Polyurethane No. 780, BEHR PREMIUM PLUS WITH STYLE® Faux Glaze No. 748, BEHR PREMIUM PLUS WITH STYLE® Metallic, BEHR PREMIUM PLUS WITH STYLE® Pearlescent, BEHR PREMIUM PLUS WITH STYLE® SandWash Foundation No. 765, BEHR PREMIUM PLUS WITH STYLE® SandWash No. 760, BEHR PREMIUM PLUS WITH STYLE® Venetian Plaster No. 770, BEHR PREMIUM PLUS WITH STYLE® Venetian Plaster Topcoat No. 775, Masonry, Stucco & Brick Paint Flat, Masonry, Stucco & Brick Paint Satin, No. 61 BEHR Deck Wash, No. 62 Multi Surface Cleaner and Mildew Stain Remover, No. 875 Basement & Masonry Waterproofing Paint, No. 880 Concrete Bonding Primer, No. 980 Concrete & Masonry Waterproofer, No. 990 Concrete Cleaner & Degreaser, No. 991 Concrete Etcher & Rust Remover, PREMIUM PLUS Interior / Exterior Hi-Gloss Enamel, PREMIUM PLUS Interior Ceiling Paint No. 558, PREMIUM PLUS Interior Eggshell Enamel, PREMIUM PLUS Interior Enamel Undercoater Primer & Sealer No. 75, PREMIUM PLUS Interior Flat, PREMIUM PLUS Interior Kitchen & Bath Sateen Lustre Enamel, PREMIUM PLUS Interior Satin Enamel, PREMIUM PLUS Interior Semi-Gloss Enamel, PREMIUM PLUS P.V.A Drywall Primer & Sealer No. 73, PREMIUM PLUS® Porch & Floor Paint, Semi-Transparent Concrete Stain, Solid Color Concrete Stain, Wet-Look Sealer
Related Products: Noise Dosimeters, 'UNIQUE' TYRE TYPE COUPLINGS, 'UNIQUE' TYRE TYPE COUPLINGS, -8322 and B-8323 Series, 1-Part Epoxy Acrylic Concrete & Garage Floor Paint, 10.2 inch Digital Photo Frame DPF-1021, 1080p Monitors True 1080p with the highest resolution on the market, 10mm Planetary Geared Motors (Flange Type), 10mm Planetary Geared Motors (Flange Type), 10mm Small DC Motors (Flat Type), 10mm Vibration Motors (Flat Type), 12mm Small DC Motors (Flat Type), 12mm Vibration Motors (Flat Type), 16mm Inline Geared Motors, 16mm Inline Geared Motors, 16mm Small DC Motors (Flat Type), 17" Chase Mounted 5-Sided Stainless Steel CombiCOMBI5500, 17" Front Mounted 5-Sided Stainless Steel CombiCOMBI5600, 19-Inch Widescreen Monitor, 2.5-Megapixel CMOS Industrial Camera, 2000 watt Voltage converter Regulator Step UP Down 110v 220v, 20mm Inline Geared Motors (Flat Type), 2508 Executive Ergonomic Chair, 2509 Big&Tall Ergonomic Chair, 26 inch LCD HDTV SK-26H520S Big HDTV viewing in a slim/portable packag
Home | Members.Benefit | Privacy.Policy | Bookmark.This.Page | Contact.Us
Conveyor technology

© 2006 - 2014 Engineering Information. All Rights reserved.