This multi-purpose stain-blocking primer adheres to glossy surfaces and "locks in" stains. This mildew resistant finish is 100% acrylic latex and is backed by a lifetime guarantee*.
- Enamel Undercoater Primer & Sealer No. 75 - MSDS
- Enamel Undercoater Primer & Sealer No. 2075 - MSDS
Where To Use
On all new and previously painted Interior surfaces. Ideal over oil or water-based coatings, heavy stains and glossy surfaces.
Remove loose paint, wash off any dirt and grease with detergent, eliminate mildew stains with BEHR® No. 62 Multi-Surface Deck-Prep Cleaner & Mildew Stain Remover.
Scuff sand glossy surfaces.
Countersink nailheads, repair imperfections and sand smooth.
Remove all dust with a damp cloth, allow to dry.
Allow new stucco, plaster and masonry to cure for 30 days before priming.
Use product when the surface and air temperatures are between 50° - 90°F (10-32ºC).
Use a high quality 3/8"-1/2" nap roller cover, nylon/polyester brush or an airless sprayer (.015 spray tip).
Coverage is 250 to 400 sq. ft. (23-37 m²) per gallon depending on the surface texture, porosity and application method.
Stir occasionally. Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
Heavy stains may require two coats.
Spot prime patched areas first, follow with a complete primer coat.
Bright or deep colors require a tinted primer. Have primer tinted close to topcoat color with no more than 4 ounces of colorant per gallon.
Dries to the touch in one hour at 77°F (25ºC) and 50% humidity, longer dry time required in cooler temperatures and in high humidity.
Topcoat in as little as one hour if "stain-blocking" is not required. Lightly stained surfaces, re-coat in 4 hours, heavy stains re-coat in 16 hours.
Dry paint film is mildew resistant.
Use soap and water.
Properly dispose of all soiled rags and protect unused product from freezing
To recycle or properly dispose of paint in your community cal 1-800-CLEANUP (U.S.A. only) or visit
*LIMITED LIFETIME GUARANTEE
BEHR PROCESS CORPORATION GUARANTEES YOUR SATISFACTION WITH THIS PRODUCT WHEN IT IS APPLIED TO A PROPERLY PREPARED SURFACE ACCORDING TO LABEL DIRECTIONS. THIS GUARANTEE SHALL BE EFFECTIVE FOR SO LONG AS YOU RESIDE IN YOUR HOME AND IS MADE TO THE ORIGINAL RESIDENTIAL CONSUMER PAINT PURCHASER. THIS GUARANTEE IS NOT TRANSFERABLE. If this product fails to perform as specified above, Behr Process Corporation will, at its option and upon proof-of-purchase, either furnish an equivalent amount of new product to you, or refund the purchase price of this product. This guarantee excludes (1) labor and costs of labor for the application of any paint and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This guarantee gives you specific legal rights and you may also have other rights, which vary from state to state.
** WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that may contain lead. Exposure to lead dust or fumes may cause serious health injury, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For additional information, contact the USEPA/Lead Information Hotline at 1-800-424-LEAD (U.S.A. only) or at www.epa.gov/lead.
Note: Since 1978, by federal law, all consumer paint has been formulated without lead or lead-compounds.
WARNING! This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm.
WARNING! IRRITANT! HARMFUL IF SWALLOWED. CONTAINS ETHYLENE GLYCOL. MAY CAUSE EYE, NOSE AND THROAT IRRITATION. AVOID CONTACT WITH SKIN AND EYES AND AVOID BREATHING OF VAPORS AND SPRAY MIST. WEAR EYE PROTECTION AND PROTECTIVE CLOTHING. USE ONLY WITH ADEQUATE VENTILATION. To avoid breathing vapors and spray mist, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness, increase fresh air. If properly used, a respirator (NIOSH approved for organic vapor with P series particulate pre-filter) may offer additional protection; obtain professional advice before using. A dust mask does not provide protection against vapors. Avoid contact with eyes and skin. Wash thoroughly after handling. Close container after each use. FIRST AID: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention; for skin, wash thoroughly with soap and water. If swallowed, get medical attention immediately.
CAUTION: KEEP OUT OF REACH OF CHILDREN-DO NOT TAKE INTERNALLY.
Being a leader in our industry requires one resource above all others - great people. To successfully respond to the changing needs of our customers and strategies of our competitors, BEHR has identified, developed, and retained quality people who... more