Login:   Password:
Not Register?    Sign Up NOW!
Date: 21 May 2018
No. 880 Concrete Bonding Primer  
Search Country   Reset filter
No. 880 Concrete Bonding Primer

Sponsored Link:

No. 880 Concrete Bonding Primer

Sponsored Link:

Product Description

A high-performance, ready-to-use, water-based pre-treatment for porous concrete, designed specifically to promote optimum adhesion. This epoxy pre-treatment, when properly applied, provides a sound surface with excellent resistance to water, alkali and efflorescence. It improves the adhesion of paints and stains by binding together loose particles. The primer will appear slightly milky in the container; however, it will dry to a clear, natural look. This specially formulated bonding primer can be used to improve bonding whenever a masonry type coating, such as a BEHR PORCH & FLOOR PAINT, BEHR SOLID COLOR CONCRETE STAIN, BEHR SEMI-TRANSPARENT CONCRETE STAIN or BEHR 1-PART EPOXY ACRYLIC CONCRETE & GARAGE FLOOR PAINT is to be applied. 

Available In 
- Concrete Bonding Primer No. 880 - MSDS 

Where To Use 
Use only on porous surfaces. Penetration of the bonding primer into the surface is essential.
Interior/exterior and vertical/horizontal concrete, masonry, stucco, cinder block and any porous stone or brick.
Ideal for use on garage floors, driveways, basements, porches, tennis courts, cool and pool decks, masonry, stucco and porous brick surfaces.
Can be used before touch-ups where surface coatings have failed.
Do not use on coated surfaces.
Not for use as a waterproofer or as a topcoat (must be topcoated with a paint or stain).
Not designed for use on wood, metal or silicone treated surfaces.
CAUTION: Surfaces may become slippery when wet.
Use caution when walking on surface when moisture is present. 

(The following steps are recommended for best results.) 
Proper surface preparation is essential for penetration of the primer.
Surface must be cleaned and porous prior to priming.
Smooth concrete surfaces must be properly etched.
New, Aged or Uncoated Concrete: 
New concrete must cure for a minimum of 30 days prior to priming.
Patch all holes and cracks with patching compound and allow to dry before priming.
Remove all dirt, grease and oil with BEHR NO. 990 CONCRETE CLEANER & DEGREASER. Refer to product label for specific instructions.
Etch using BEHR NO. 991 CONCRETE ETCHER & RUST REMOVER. Refer to product label for specific instructions.
Painted, Stained or Sealed Concrete: 
Completely strip all coatings prior to use.
For touch-ups where surface coatings have failed, completely remove any loose or peeling paint by scrapping, wire brushing or grinding.
Remove all dirt, grease and oil with BEHR NO. 990 CONCRETE CLEANER & DEGREASER. Refer to product label for specific instructions.
Etch using BEHR NO. 991 CONCRETE ETCHER & RUST REMOVER. Refer to product label for specific instructions.

Wear appropriate eye, skin and apparel protection when applying BEHR NO. 880.
Stir BEHR NO. 880 CONCRETE BONDING PRIMER thoroughly before and occasionally during application.
Use product when surface and air temperature are above 50°F and below 90°F (10-32°C).
Avoid applying primer to hot surfaces.
On horizontal surfaces apply a thin even coat using a 3/8"-1/2" nap roller cover, pad applicator, brush, airless sprayer (.015 spray tip), garden sprayer or a squeegee at a spread rate of 350-400 sq. ft. per gallon.
Do not over apply or allow product to puddle. Remove any puddles by spreading product to drier areas or by wiping up excess with a clean cloth.
On vertical surfaces apply using an airless sprayer or brush.
Initial foaming may be observed but will disappear upon drying.

Dry Time 
Dries to the touch in 2 to 4 hours at 77°F and 50% humidity.
Additional dry time is needed in cooler temperatures and higher humidity.
Must apply a topcoat after at least 8 hours.
Topcoat must be applied within 30 days.

Clean Up 
Use any commercial brush cleaner. Note: Do not use soap and water to clean brushes or other applicators as they will become gummy.
Properly dispose of all soiled rags.
For disposal of empty containers and unused primer, contact your household refuse collection service.
Do not store unused product inside the home. Store in a cool area away from heat or sunlight.
* Warning! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. 

LIMITED WARRANTY: Behr Process Corporation warrants that this product meets Behr's manufacturing specifications. If this product does not meet these specifications, Behr will, at its option and upon proof-of-purchase, either furnish an equivalent amount of new product to you or refund the purchase price of this product. Behr will not be responsible for (1) labor or the cost of labor for removal or application of any product; or (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. 
WARNING! This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. 

USE ONLY WITH ADEQUATE VENTILATION. To avoid breathing vapors and spray mist, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness, increase fresh air. If properly used, a respirator (NIOSH approved for organic vapor with P series particulate pre-filter) may offer additional protection; obtain professional advice before using. A dust mask does not provide protection against vapors. Avoid contact with eyes and skin. Wash thoroughly after handling. Close container after each use. 
FIRST AID: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention; for skin, wash thoroughly with soap and water. If swallowed, get medical attention immediately. CAUTION: KEEP OUT OF REACH OF CHILDREN - DO NOT TAKE INTERNALLY.

Company Details

Being a leader in our industry requires one resource above all others - great people. To successfully respond to the changing needs of our customers and strategies of our competitors, BEHR has identified, developed, and retained quality people who... more

More Products of this Company: 1-Part Epoxy Acrylic Concrete & Garage Floor Paint, BEHR PREMIUM PLUS WITH STYLE® Bellagio Faux™ No. 725, BEHR PREMIUM PLUS WITH STYLE® Crackle No. 755, BEHR PREMIUM PLUS WITH STYLE® Crystal Clear Water Based Polyurethane No. 780, BEHR PREMIUM PLUS WITH STYLE® Faux Glaze No. 748, BEHR PREMIUM PLUS WITH STYLE® Metallic, BEHR PREMIUM PLUS WITH STYLE® Pearlescent, BEHR PREMIUM PLUS WITH STYLE® SandWash Foundation No. 765, BEHR PREMIUM PLUS WITH STYLE® SandWash No. 760, BEHR PREMIUM PLUS WITH STYLE® Venetian Plaster No. 770, BEHR PREMIUM PLUS WITH STYLE® Venetian Plaster Topcoat No. 775, Masonry, Stucco & Brick Paint Flat, Masonry, Stucco & Brick Paint Satin, No. 61 BEHR Deck Wash, No. 62 Multi Surface Cleaner and Mildew Stain Remover, No. 875 Basement & Masonry Waterproofing Paint, No. 980 Concrete & Masonry Waterproofer, No. 990 Concrete Cleaner & Degreaser, No. 991 Concrete Etcher & Rust Remover, PREMIUM PLUS Interior / Exterior Hi-Gloss Enamel, PREMIUM PLUS Interior Ceiling Paint No. 558, PREMIUM PLUS Interior Eggshell Enamel, PREMIUM PLUS Interior Enamel Undercoater Primer & Sealer No. 75, PREMIUM PLUS Interior Flat, PREMIUM PLUS Interior Kitchen & Bath Sateen Lustre Enamel, PREMIUM PLUS Interior Satin Enamel, PREMIUM PLUS Interior Semi-Gloss Enamel, PREMIUM PLUS P.V.A Drywall Primer & Sealer No. 73, PREMIUM PLUS® Interior Flat Enamel, PREMIUM PLUS® Porch & Floor Paint, Semi-Transparent Concrete Stain, Solid Color Concrete Stain, Wet-Look Sealer
Related Products: 1-Part Epoxy Acrylic Concrete & Garage Floor Paint, 1/3 & 3/4 HP Fixed Speed, Variable Length Turbines, 120 mm Mortar Ammunition Family, 2 HP Fixed Speed, Variable Length Turbines, 3M Spra-Ment Craft and Display Adhesive, 3M Super 77 Multipurpose Adhesive, 3M™ Blue 72 Spray Adhesive, 3M™ FoamFast 74 Spray Adhesive, 3M™ Hi-Strength 90 Spray Adhesive, 3M™ Rubber & Vinyl 80 Spray Adhesive, 3M™ Scotch-Brite 1 Box of General Purpose Pads, 3M™ Spray Mount™ Artist's Adhesive, 3M™ Super 77™ Multipurpose Adhesive, 4" Fixed Length Turbines, 400 Mhz Antenna, 5-IN-ONE PAPER CONE FINISHING MACHINE, 6" High Capacity Submersible Turbine Repair Parts, 6" High Capacity Submersible Turbines, 900 Mhz Antenna, ABS U/V Protected 2 1/2\" Diameter JET Filter Wick Drainage System, ACCESSORIES FOR MIXING AND APPLICATION, Adhesive & Sealants, Adhesives, Adon, Advanced Manufacturing (Carleton Place, Ontario, Canada)
Home | Members.Benefit | Privacy.Policy | Bookmark.This.Page | Contact.Us
Conveyor technology

© 2006 - 2018 Engineering Information. All Rights reserved.