high-performance, ready-to-use, water-based floor paint that resists hot tire pick-up and marring. The finish is highly resistant to chemicals, oil and gasoline, which reduces the need for maintenance of hard-to-clean interior or exterior floors. This durable, satin finish floor paint also resists scuffing, fading, cracking, peeling and blistering.
- Clear No. 910 - MSDS
Pre-mixed Colors Available in Select Markets
- Silver Gray No. 901 - MSDS
- Slate Gray No. 902 - MSDS
- White Base No. 900 - MSDS
- Deep Base No. 930 - MSDS
Where To Use
Interior or exterior porous concrete, masonry, stone and brick.
Ideal for use on horizontal surfaces such as garage floors, driveways, basements, porches and pool or cool decks.
Can also be used on tennis courts, walkways and playgrounds.
Where Not To Use
Vertical surfaces (walls, fences, etc.).
Not recommended for use on wood, metal, glazed surfaces, or areas subject to standing water or severe hydrostatic pressure. To test for hydrostatic pressure, randomly tape 12 x 12 sheets of clear plastic to the floor; if moisture forms underneath the plastic within 24 hours, hydrostatic pressure exists and this product should not be used.
Industrial areas subject to forklift use.
CThis exciting new finish was inspired by old world European faux finishes. Bellagio Faux is durable, easy to apply and touch up and has a sophisticated washed look. It is used on top of a base color of BEHR PREMIUM PLUS® Interior Flat Enamel paint.
- BEHR PREMIUM PLUS WITH STYLE® Bellagio Faux™ No. 725 - MSDS
IMPORTANT! DO NOT OPEN CAN WITHOUT READING THESE INSTRUCTIONS.
WHERE TO USE
Properly painted Interior surfaces. Ideal for Family Rooms, Living Rooms, Bedrooms, Kitchens, Bathrooms, Offices and Hallways.
Remove loose paint, wash off any dirt and grease with detergent, remove mildew stains with BEHR® MULTI-SURFACE CLEANER & MILDEW STAIN REMOVER NO. 62. Rinse and allow to dry.
Countersink nailheads, repair imperfections and sand smooth.
Scuff sand glossy surfaces.
Remove all dust with a damp cloth, allow to dry.
Allow plaster and masonry to cure 30 days before priming.
If priming is necessary, use BEHR ENAMEL UNDERCOATER PRIMER & SEALER NO. 75.
Apply tinted BEHR PREMIUM PLUS® Interior Flat Enamel paint for base color according to label instructions.
Refer to the BEHR Bellagio Faux Colors & Techniques Guide and www.behr.com for additional instructions on application. Dry time recommendations are based on 77°F (25°C) and 50% humidity and will vary depending on the air temperature/humidity and how thick the product is applied.
Use product on smooth to lightly textured surfaces. DO NOT THIN. Typical coverage is 250-350 sq. ft. (23-33 m²) per gallon.
Generously apply BELLAGIO FAUX™ using the BEHR BELLAGIO FAUX BRUSH NO. 722 or a nylon/polyester brush. Use random X like strokes to fill in a 3 x 3' (90 x 90 cm) section.
Allow section to set for 15-18 minutes (7-10 minutes if mixed with Metallic) until the BELLAGIO FAUX begins to lose the wet look.
Use soft X like strokes to smooth down the product with the BEHR BELLAGIO FAUX TROWEL NO. 721.
Repeat this process in 3 x 3' sections until your entire surface is complete.
Allow 4 hours to dry if a second top color of BELLAGIO FAUX is being applied. Apply second top color repeating first top color instructions. Allow the second top color to set for 7-10 minutes (15-18 minutes if first top color is mixed with Metallic) before smoothing down with a trowel.
At 77°F (25°C) and 50% humidity: dries to touch in 1 hour, allow 4 hours to dry if applying a second top color. Longer dry time required in cooler temperatures and in higher humidity.
After 30 days, the surface is fully cured and may be cleaned with a mild, non-abrasive liquid detergent.
Dry paint film is mildew resistant.
Wash tools with soap and water.
Properly dispose of all soiled rags and protect unused product from freezing.
To recycle or properly dispose of paint in your community, call 1-800-CLEANUP or visit www.Earth911.org.
Refer to the BEHR Premium Plus With Style™ Bellagio Faux Colors & Techniques Guide for additional tips or visit us at www.behr.com for expert project advice.
LIMITED WARRANTY Behr Process Corporation warrants that this product meets Behr's manufacturing specifications. If this product does not meet these specifications, Behr will, at its option and upon proof of purchase, either furnish an equivalent amount of new product to you or refund the purchase price of this product. Behr will not be responsible for (1) labor or the cost of labor for removal or application of any product; or (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.
* WARNING! If you scrape sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
WARNING! This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm.
WARNING! IRRITANT! HARMFUL IF SWALLOWED. CONTAINS: TEXANOL. MAY CAUSE EYE, NOSE AND THROAT IRRITATION. AVOID CONTACT WITH SKIN AND EYES AND AVOID BREATHING OF VAPORS AND SPRAY MIST. WEAR EYE PROTECTION AND PROTECTIVE CLOTHING. USE ONLY WITH ADEQUATE VENTILATION. To avoid breathing vapors and spray mist, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness, increase fresh air. If properly used, a respirator (NIOSH approved for organic vapor with P series particulate pre-filter) may offer additional protection; obtain professional advice before using. A dust mask does not provide protection against vapors. Avoid contact with eyes and skin. Wash thoroughly after handling. Close container after each use. FIRST AID: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention; for skin, wash thoroughly with soap and water. If swallowed, get medical attention immediately.
CAUTION: KEEP OUT OF REACH OF CHILDREN-DO NOT TAKE INTERNALLY
Being a leader in our industry requires one resource above all others - great people. To successfully respond to the changing needs of our customers and strategies of our competitors, BEHR has identified, developed, and retained quality people who... more