This 100% acrylic latex, mildew resistant finish is available in two sheens, Low-Lustre and Gloss. These products resist scuffing, fading, cracking and peeling while providing a durable, long lasting finish that is ideal for both interior and exterior applications.
Pre-mixed Colors Available in Select Markets
- Low-Lustre Ultra Pure White No. 6050 - MSDS
- Low-Lustre Silver Gray No. 6694 - MSDS
- Low-Lustre Slate Gray No. 6695 - MSDS
- Gloss Silver Gray No. 6794 - MSDS
- Gloss Slate Gray No. 6795 - MSDS
- Low-Lustre Deep Base No. 6300 - MSDS
- Low-Lustre Pastel Base No. 6500 - MSDS
- Low-Lustre Accent Base No. 6600 - MSDS
- Gloss Ultra Pure White No. 6705 - MSDS
- Gloss Deep Base No. 6730 - MSDS
- Gloss Pastel Base No. 6750 - MSDS
- Gloss Accent Base No. 6760 - MSDS
- Low-Lustre Ultra Pure White No. 26050 - MSDS
- Low-Lustre Slate Gray No. 26695 - MSDS
Low VOC Tintable Bases
- Low-Lustre Deep Base No. 26300 - MSDS
- Low-Lustre Pastel Base No. 26500 - MSDS
- Low-Lustre Accent Base No. 26600 - MSDS
Where To Use
Previously painted or primed Interior or Exterior surfaces. Ideal for Porches, Floors, Decks, Basements, Patios, Siding, Trim, Patio Furniture and Trellises. Not for use on Garage Floors.
CAUTION: Painted surfaces may become slippery when wet. To help prevent slips, add BEHR® No. 970 NON-SKID FLOOR FINISH ADDITIVE.
All surfaces must be clean, sound, dry and free of any dirt, oil and grease. Eliminate mildew stains with BEHR No. 62 Multi-Surface Deck-Prep Cleaner & Mildew Stain Remover.
New or weathered wood; use BEHR No. 63 Wood Cleaner Brightener Conditioner.
Uncoated Concrete or masonry surfaces; allow new surfaces to cure 30 days. Use BEHR 990 Concrete Cleaner & Degreaser and follow with BEHR No. 991 Concrete Etcher & Rust Remover.
Painted surfaces; remove loose paint, wash off any dirt and grease with detergent.
Scuff sand new wood or glossy surfaces.
Use stainless steel or galvanized nails to prevent nail staining. Countersink nailheads, repair imperfections and sand smooth.
Remove all dust with a damp cloth, allow to dry.
Interior: Use BEHR No. 75 Enamel Undercoater Primer & Sealer. Over Interior/Exterior concrete or masonry surfaces, use BEHR No. 880 Concrete Bonding Primer.
Exterior: BEHR No. 436 Water Base Primer & Sealer. Over woods with heavy tannin bleed, use No.434 Oil Base Primer & Sealer.
Use product when the surface and air temperatures are between 50° - 90°F (10°-32°C).
Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
Use a high quality 3/8"-1/2" nap roller cover, nylon/polyester brush or an airless sprayer (.015 spray tip).
Coverage is 200 to 400 sq. ft. (23-37m²) per gallon depending on the surface texture, porosity and application method.
Apply second coat in the opposite direction of the first.
Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
Certain colors may require more than one coat for complete hide.
Dries to touch in four hours at 77°F (25°C) and 50% humidity. Allow first coat to dry 24-48 hours before applying the second. Allow 72 hours before subjecting to normal use. Longer dry time required in cooler temperatures and in higher humidity.
After four weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
Dry paint film is mildew resistant.
Use soap and water.
Properly dispose of all soiled rags and protect unused product from freezing
To recycle or properly dispose of paint in your community call 1-800-CLEANUP (U.S.A. only) or visit www.Earth911.org.
Behr Process Corporation warrants that this product meets Behr's manufacturing specifications. If this product does not meet these specifications, Behr will, at its option and upon proof of purchase, either furnish an equivalent amount of new product to you or refund the purchase price of this product. In no event will Behr be responsible for (1) labor or the cost of labor for removal or application of any product; or (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.
** WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that may contain lead. Exposure to lead dust or fumes may cause serious health injury, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For additional information, contact the USEPA/Lead Information Hotline at 1-800-424-LEAD (U.S.A. only) or at www.epa.gov/lead.
Note: Since 1978, by federal law, all consumer paint has been formulated without lead or lead-compounds.
Sanding or scraping pressure treated lumber may be hazardous; wear appropriate protection.
WARNING! This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm.
WARNING! IRRITANT! HARMFUL IF SWALLOWED. CONTAINS ETHYLENE GLYCOL. MAY CAUSE EYE, NOSE AND THROAT IRRITATION. AVOID CONTACT WITH SKIN AND EYES AND AVOID BREATHING OF VAPORS AND SPRAY MIST. WEAR EYE PROTECTION AND PROTECTIVE CLOTHING. USE ONLY WITH ADEQUATE VENTILATION. To avoid breathing vapors and spray mist, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness, increase fresh air. If properly used, a respirator (NIOSH approved for organic vapor with P series particulate pre-filter) may offer additional protection; obtain professional advice before using. A dust mask does not provide protection against vapors. Avoid contact with eyes and skin. Wash thoroughly after handling. Close container after each use. FIRST AID: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention; for skin, wash thoroughly with soap and water. If swallowed, get medical attention immediately.
CAUTION: KEEP OUT OF REACH OF CHILDREN-DO NOT TAKE INTERNALLY.
Being a leader in our industry requires one resource above all others - great people. To successfully respond to the changing needs of our customers and strategies of our competitors, BEHR has identified, developed, and retained quality people who... more