Topic Name: Cooling Chips with Thermoelectrics: Researchers have made ultrathin refrigerators for microprocessors.
Research persons: Rama Venkatasubramanian
Location: California, United States
If you could remove the layers of circuitry in your computer and touch the main processor while it's running a video, you would feel its blistering heat, which can exceed 100 °C. Such heat, a natural by-product of shuttling electrons
through transistors, can impede performance and even damage the processor in the long run. Traditionally, engineers have used simple copper plates to pull away the heat, and fans or liquid-based cooling systems. But these systems are bulky and can sap energy.
Now researchers at Intel, RTI International of North Carolina, and Arizona State University have shown that it's possible to build an efficient microrefrigerator that can target hot spots on chips, saving power and space, and more effectively cooling the entire system. Their work also demonstrates, for the first time, that it is possible to integrate thermoelectric material into chip packaging, making the technology more practical than ever before. A paper detailing the
research was just published in Nature Nanotechnology.
The fundamental technology used to chill the chip, a thermoelectric cooler, isn't new, explains Rama Venkatasubramanian, senior research director at the Center for Solid State Energetics at RTI International. In a Nature paper from
2001, he and his team showed that a material called a nanostructured thin-film
superlattice has superior thermal properties to other types of thin thermoelectric materials: the superlattice conducts electricity well but impedes the flow of heat. When an electric current zips through the material, its
temperature can drop to about 55 °C.
"People have been talking about using high-efficiency thermoelectric materials
for cooling hot spots on chips for years," says Intel manager Ravi Prasher. He
says that part of the reason he and his colleagues were able to succeed is
because they used a material that has shown exceptional thermal properties, and
they relied on Intel's knowledge of chip packaging to build an integrated
thermoelectric system that was engineered to fit within the confines of a chip's
To put the microrefrigerator in the chip package, the engineers integrated the
cooler onto a square of copper, just like the type that's already used in chip
packaging to disperse heat. Usually this piece of copper is in close contact
with the chip, but the researchers put the 0.4-millimeter-square cooler in
between the chip and the copper. When the microrefrigerator was turned on, it
cooled a localized region on the chip by about 15 °C. This is significant, says
Venkatasubramanian, because generally speaking, for each five-degree increase in
chip temperature, there is a marked decrease in reliability and performance of a
chip. In the demonstration, the researchers only used one microrefrigerating
unit but foresee using three or four per chip, to cover the hottest areas.
However, the performance wasn't even close to the maximum amount of cooling
that the microrefrigerator is capable of when it's not confined to the chip
housing. "We've found good performance," Venkatasubramanian says, "but there are
still a lot of challenges." When engineers put the cooler inside the package,
there are a number of additional contact points where the cooler is connected to
the copper plate and packaging electronics, he says. Prasher explains that the
thermal characteristics of these contacts play a significant role in reducing
the cooler's efficiency: "By itself, [reducing resistance of thermal contacts]
is a significant research area." People are exploring different types of solder
and even carbon nanotubes to reduce the resistance at the interface, he says,
but the problem still has to be resolved.
Regardless, Ali Shakouri, a professor of electrical engineering at the
University of California, Santa Cruz, is impressed by the work so far. "This is
a good achievement," he says. "The idea [that] there's an uneven distribution of
temperature in a microprocessor, and that by selectively cooling certain
locations you can do a better job and save power, has been around for a while,
but it hadn't been demonstrated on a chip before."
Shakouri notes that as the microprocessor industry moves toward using multiple
cores or processing centers on a chip, the problem of hot spots will get worse,
because workloads are shifted from core to core, creating more transient hot
spots. Fans, used in many computers today, don't respond quickly or effectively.
"If you could selectively have microrefrigerators throughout a multicore chip,"
he says, "you could lower power and increase performance."
The researchers don't have a timeline for commercialization. Right now, even
though the cooler could be incorporated into traditional chip packaging, it
would still be prohibitively expensive. After all, says Venkatasubramanian,
adding a cooler is essentially adding a completely new layer of electronics to a
chip. He says that if the cost and scalability of these coolers can be
addressed, then he's confident that they'll find a market.
A Better Way to Make Nano Stuff, Durable molds could serve as a practical manufacturing tool in making nano devices., a new method for controlling the self-assembly of nanometer and micrometer-sized particles, ANL Researchers Unveiled How Nanocluster Contaminants Increase Risk of Spreading Using Advanced Photon Source, Antimicrobial properties of nanotubes, Bacteria with the mini-genomes for optimized biotechnological uses, Bioengineers have discovered chemical reactions in a single living cell for the first time, Biomimetic Nanotechnology: a new type of biosensor , BNL Researchers Used DNA for the First time to Yields 3-D Crystalline Organization of Nanoparticles, Carbon-Nanotube Memory that Really Competes, Cereal grains use their awns to "swim" into the soil, Cheap, Self-Assembling Optics: Researchers have made new nano building blocks for optical computing and solar-cell coatings., Development of Measurement Set-up for Electromechanical Analysis of Bucky Paper Actuators, sheets of Carbon Nanotubes, Engineers explore environmental concerns of nanotechnology, LLNL Researchers Detected a Signature for Water inside Single-Walled Carbon Nanotubes, MIT develops thin-film 'micro pharmacy' may be used to deliver drugs for cancer, epilepsy, diabetes and other diseases, Nanonets-To Convert Solar Energy Into Hydrogen, New Graphene-Based Material Clarifies Graphite Oxide Chemistry, New light on the underlying mechanism for abnormal development of the neural system, New tool for biological systems, NSET brings a new strategic plan for the work of the National Nanotechnology Initiative, NSF funding launches Nanobiotechnology Center at Cornell, Penn Engineers Create Carbon Nanopipettes that may useful for Concurrently Measuring Electrical Signals of Cells during Fluid Injection, Penn Engineers has Constructed a Theoretical Model to Predict the Strength of Metals at the Nanoscale, Surface Dislocation Nucleation, Phase Transitions Induced by Nanoconfinement in Liquid Water: novel way to control water behavior, Remote-control nanoparticles deliver drugs directly into tumors: Developed by MIT Scientists